Representatives
Rep Portal
Kitchen lightingSmall furniture LED aluminum recessed extrusions are perfect for creating ambient lighting in kitchens and dining rooms. Under-cabinet lights illuminate the worktop well and facilitate the preparation of meals and cleaning. Extrusion used KOZEL.
pic. 1
The PDS-H extrusion enables aesthetic mounting via concealed mounting brackets. It is a practical solution when installing lighting on ready kitchen furniture.
pic. 2
The PDS-H extrusion enables aesthetic mounting via concealed mounting brackets. It is a practical solution when installing lighting on ready kitchen furniture.
pic. 3
In small kitchens, under-cabinet LED lighting systems should illuminate the countertop well without taking up too much space or being difficult to mount. The MICRO-H extrusion fulfills both conditions: it is small and it easily snaps into mounting brackets screwed to the furniture with a standard screw.
pic. 4
MICRO-ALU is an aluminum LED extrusion with many applications. It is small, light and can be attached to furniture walls using professional double-sided adhesive tape.
pic. 5
A good solution for work spaces requiring intensive lighting is TRIADA - a flat LED track, which holds up to three LED strips.
pic. 6
PDS-4-K is a classic LED furniture extrusion. It is light, small and after being mounted in the furniture wall, its flange covers the unsightly edges of the pre-cut groove.
pic. 7
When the lighting system must match the existing interior design, we recommend KLUŚ extrusions with a wide range of mounting accessories. GIZA is an aluminum LED extrusion that can be suspneded on steel wires or rods, or mounted to various types of surfaces.
pic. 8
Good lighting of professional work areas while avoiding glare is a difficult task. A good solution is to use angled LED extrusions such as 45-ALU.
pic. 9
The OLEK round LED extrusion has smooth, aesthetic walls and can be combined into long lines of light. It is used to build LED fixtures, mainly suspended from fasteners or conductive end caps.
pic. 10
The PDS-O round LED extrusion is one of the most popular KLUŚ extrusions. One of its most interesting applications is creating LED fixtures equipped with conductive end caps. They make the use of a power cable unnecessary.
pic. 11
LOC-30 is an angled LED extrusion that works best in under-cabinet lighting systems. LOC-30 directs the light at a 30-degree angle. Inside the extrusion you can conveniently place your wiring.
pic. 12
KOPRO-30 is an angled LED extrusion, designed mainly for lighting kitchen worktops. It directs light at an angle of 30 degrees and has two types of frosted covers: flat and rounded.
pic. 13
KOPRO is an angled LED extrusion, designed mainly for lighting kitchen worktops. KOPRO directs the light at a 45-degree angle and has three types of frosted covers: flat, rounded and square.
pic. 14
90-degree LED extrusions will work well in places where the light source should be hidden. The 45-ALU extrusion mounted on the cabinet door will illuminate the inside of the cabinet, but will not hurt the user's eyes.
pic. 15
