Representatives
Rep Portal
Bathroom lightingBathroom LED lighting is another advantage of KLUŚ. It is often used both in residential bathrooms and in public changing rooms or toilets. The narrow LED extrusion can be installed between the floor tiles, mounted behind the mirror or after sealing, illuminate the shower. Extrusion used PDS4-PLUS.
pic. 1
When mounting lighting in the bathroom, the presence of moisture should be taken into account. In order for the installation to be safe, one should, among other things, ensure that the fixtures are properly sealed. The PDS-4-PLUS extrusion is designed for LED strips sealed in a special silicone sleeve, easily mounted with one click.
pic. 2
To illuminate a room well, one source of light is not enough. Extrusions for LED strips such as MICRO-ALU can be used as general and decorative lighting. The OLEK extrusion, with adjustable lighting direction, will be the perfect light next to the mirror.
pic. 3
Everyday, getting-ready in front of the mirror requires bright and even lighting. To achieve this effect, two longitudinal OLEK extrusions mounted on both sides of the mirror are sufficient. Mounted on rods, the extrusion can be adjusted to change the direction of light.
pic. 4
Even in small bathrooms it is worth taking care of additional decorative lighting. A small detail, an additional niche for a 90 degree LED extrusion, will greatly improve the appearance of the bathroom. A small and easy-to-install 45-16 extrusion is suitable for such small spaces.
pic. 5
To get an interesting effect you do not have to create large, complicated structures. The narrow LINO LED extrusion recessed into a flat shelf will create nice ambient lighting.
pic. 6
The narrow PICO LED extrusion evenly illuminates the face in front of the mirror. This extrusion, which is the smallest in the KLUŚ offer, can easily be integrated between the bathroom tiles.
pic. 7
PDS-4-ALU is one of the standard extrusions that are relatively easy to seal up to IP67. A sealed LED strip is used while the cover and end caps can be sealed separately.
pic. 8
It is an unusual, but very attractive solution to put a line of light in the wall. The HR-ALU waterproof LED extrusion has the right deptht to be flush with the surface of bathroom tiles.
pic. 9
It is an unusual, but very attractive solution to put a line of light in the wall. The HR-ALU waterproof LED extrusion has the right deptht to be flush with the surface of bathroom tiles.
pic. 10
The HR-ALU waterproof LED extrusion has the right depth to be flush with the surface of bathroom tiles. It withstands standard loads expected for floors.
pic. 11
KLUŚ can seal most extrusions in its offer. Models intended for furniture applications (recessed aluminum extrusions) such as MICRO-K can be successfully used in the bathroom in the sealed version.
pic. 12
To illuminate a room well, one source of light is not enough. Extrusions for LED strips such as MICRO-ALU can be used as general and decorative lighting.
pic. 13
To illuminate a room well, one source of light is not enough. Extrusions for LED strips such as MICRO-ALU can be used as general and decorative lighting.
pic. 14
To illuminate a room well, one source of light is not enough. Extrusions for LED strips such as MICRO-ALU can be used as general and decorative lighting.
pic. 15
To illuminate a room well, one source of light is not enough. Extrusions for LED strips such as MICRO-ALU can be used as general and decorative lighting.
pic. 16
To illuminate a room well, one source of light is not enough. Extrusions for LED strips such as MICRO-ALU can be used as general and decorative lighting.
pic. 17
