REGULOR ZWK EXTRUSION

one profile FOUR ANGLES OF ILLUMINATION ! , REF. B468+43
Profil led Lipod - Kluś Design
Accessories:
Profil led Lesto KluśREGULOR End Cap with hole, REF.00313
Profil led Lesto KluśPL-PDM Mounting bracket , REF.24041
Profil led Lesto KluśSATIN S Focusing Cover clear, REF.17111
Profil led Lesto KluśREGULOR End Cap, REF.00310
Profil led Lesto KluśHS Cover frosted CERTIFIED, REF.1369
Profil led Lesto KluśKA-BIS Cover frosted, REF.17071
Profil led Lesto KluśKA-BIS Cover clear, REF.17072
Profil led Lesto KluśHS Cover Clear CERTIFIED, REF.1370
Profil led Lesto KluśPDS4-ALU End Cap, REF.1055
Profil led Lesto KluśElectricity conductive end cap for the PDS4 - ALU extrusion, REF.1407
Profil led Lesto KluśMounting Bracket for the PDS 4 - ALU; MICRO - ALU, PDS-O extrusions, REF.24190
Profil led Lesto KluśMounting Bracket for the PDS 4 - ALU; MICRO - ALU, PDS-O extrusions, chrome matte, REF.1345
Profil led Lesto KluśProximity Switch with cable 12 / 24V;, REF.00235
Profil led Lesto KluśProximity Switch 12 / 24V;, REF.00234
Profil led Lesto KluśDP-ZZ fastener, REF.00651
Profil led Lesto KluśDP-MOC fastener, REF.00645
Profil led Lesto KluśDP-MOC-ZZ fastener, REF.00647
Profil led Lesto KluśM4 Mounting Set, REF.42301
Profil led Lesto KluśM5 Mounting Set, REF.42302
Regulor_albym_roz-1.gif1animacja_swiecenie_regulor.gif2album_regulor.png3album_regulor5.png4

FOUR ANGLES OF LIGHT

description



Applications:

 

- housing for flexible or hard LED strips that are 8-10mm wide (0.4")


- eliminates obstacles related to LED light strip mounting


- extrusion acts as the connector between the light source and the application area and provides a stylish and finished look


- maximizes the applications and uses available for LED light strips


- lighting or illumination of certain areas (stream of light may vary depending on the power of applied LEDs)


- provides 4 different light angles: 10, 30, 60, 90 degree


- used as interior lighting, especially to light cabinets, stairs, glass-cases, or as a decoration light for a niche in drywall ceilings


- extrusion can be made waterproof ( IP 67 ) and be used as an outdoor lighting for elevations or architectural elements of gardens.

 

 

Product Description:

 

Material

Double anodized aluminum

Cover

Frosted, clear

Standard Length

39.4" (1m), 78.75" (2m), 118.11" (3m)

Mounting

Mounting glue, double sided mounting tape, mounting bracket

Ending Element

Plastic end caps ( accessories )

Certificate

CE

Patent

Patent rights

 

 

 

 

Advantages:

 

 

Regulor extrusion includes aluminum insert. The insert permits to adjust angles of LED light. 4 different light angles can be received by assembling the extrusion with focusing cover “S” and putting insert into the extrusion in the proper notch. If these two conditions are fulfilled it is possible to get the following angles of light: 10 degree (without insert) and 30, 60, 90.
Environment friendly; modern design

technical drawing